The benchmark in high performance paving jointing mortars - designed for all types of areas with pedestrian and light to medium vehicular traffic loads.

An excellent pavement jointing and pointing mortar for natural stone, reconstituted stone and concrete block or flag / slab pavement surfaces, such as those on patios, driveways, town centres, market squares and commercial areas etc, with paving joints >5mm wide.

Easily and quickly applied as a slurry, can be applied in wet weather. Non staining, no weeds, no insects, suitable for mechanical street cleaners and sweepers, plus it is fully resistant to frequent freeze thaw and de-icing salts exposure.

A high performance Paving Jointing Mortar specifically designed for paving with narrow joints down to <3mm for pedestrian and light vehicular traffic loads.

This paving jointing mortar is suitable for natural stone, reconstituted stone and concrete paving block surfaces on patios, driveways, other pedestrian areas in commercial precincts and other developments etc.

vdw 805 is an advanced water dispersed, epoxy bound formulation, that is easily and very quickly applied by slurry techniques - and without any delays or waiting in wet weather. It is non staining,prevents weeds developing and is fully resistant to boring insects and freeze thaw reaction.

vdw 840 Plus for pedestrian patios and paving - is the most advanced single pack jointing / grouting mortar based on a NEW polymeric sand formulation that is supplied ready to use, vacuum packed in a sealed bag within a plastic tub.

vdw 840 Plus is unique and a major advance in single pack, air cured, polymeric sand based jointing mortars for domestic patios and paving.

It is designed for use on all types of stone and concrete paving and in joints from 30 down to a minimum 3mm wide. vdw 840 Plus is not only tolerant of damp conditions during application, it is actually slurry applied onto pre-dampened paving and is therefore extrememly tolerant of the British Weather - no more waiting for a sunny day to complete the patio!.

Simply open the bag, pour out onto the dampened surface in small piles and slurry apply using a rubber squeegee, directly into the joints; after a few minutes rinse off any excess and after a further few minutes, brush off any residue from the paving surfaces - Done - Easy!

The easiest, best performing, ready to use, single pack, polymeric sand based jointing mortar on the global market for domestic patios, paths and garden areas.

Ideal for DIY application as well as for professionals - extremely fast application and great results are achieved with this New material which is also non-staining, weed and boring insect resistant.

vdw 840 Plus is suitable for all types of patios using natural stone (granite, limestone, sandstone, slate etc.), reconstituted stone and concrete blocks and flags etc.

Note: vdw 840 Plus is not designed for areas used by vehicles or commercial / public areas with Mechanical Cleaning machines - for these areas please use our epoxy resin bound jointing mortars vdw 800, vdw 805, vdw 850, or vdw 855 - According to your specific paving useage and loading requirements see our Paving Jointing Mortar Selection Guide on the website or call Dave or Gary on 01257 266696 if you need any additional assistance or advice making your selection.

vdw 850 is a particularly high performance and extremely durable, self compacting, epoxy bound paving jointing mortar for pedestrian, light and medium vehicular traffic loads, including larger vehicles and mechanical road sweepers, pressure water jetting etc, etc.

Suitable for extremely fast self compacting aplication, with no delays or waiting (or additional costs!), even in continuously wet weather and at colder temperatures. This is because as the material can be applied in the rain - and in cold (non-freezing) conditions it can still be applied and will continue to cure when temperatures increase above 8-10 degrees C.

vdw 850 is non staining, prevents weed growth, prevents boring insects and has no shrinkage cracking. It is also fully resistant to de-icing salts and freeze-thaw conditions

Quite simply the best paving jointing mortar on the market and the global technology leader!

vdw 850 is the ideal paving jointing mortar for use with natural stone, reconstituted stone and concrete block, slab and other paving surfaces on superior patios, driveways and paved roads, or road junctions and intersections, town centres, retail and commercial developments, plus all sorts of other paved areas.

The heavy duty grade of vdw 850 jointing mortar, designed specifically for use on areas with heavy vehicle traffic and heavy vehicle standings etc.

Self compacting, fast application with no waiting, stopping or delays in wet weather. Can be applied in low temperatures and continue to cure as the temperatures increases.

vdw 855 means absolutely no weed growth and no insects. It is non staining and fully resistant to de-icing salts and freeze-thaw reaction - the toughest most durable paving jointing mortar available.

It is suitable for pavement jointing with natural stone, reconstituted stone and paving blocks in town centres, busy roads and intersections, heavily trafficked roundabouts, vehicle loading and turning areas,industrial facilities and heavy vehicle hard standings etc.

A robust steel, helical mixing paddle to ensure complete and thorough mixing of epoxy resin bound paving jointing mortars including vdw 800, vdw 805, vdw 850 and vdw 855. Design to fit any good quality heavy duty electric drill bit (10mm shaft). To be used on low speed only and mix the mortars as stated on their individual Technical Data Sheets. Note - Our polymeric sand based paving jointing mortar vdw 840 Plus does not require mixing on site as it is supplied pre-mixed in vacuum sealed bags within the pails.

A heavy duty wooden backed rubber squegee head that is ideal for the application of all of the GftK range of paving jointing mortars including vdw 800, vdw 805, vdw 840 Plus, vdw 850, vdw 855. This head is 250mm wide which makes it easy to control the application around details and edges of the paving. Important Note: We do not supply the 'broom handle' needed to insert on the squegee or soft bristle brush heads, as these are inexpensive and widely available locally in any DIY Shed, builders merchant, or hardware store.

A heavy duty wooden backed soft bristle brush head that is ideal for the final 'brushing-off' of all of the GftK range of paving jointing mortars including vdw 800, vdw 805, vdw 840 Plus, vdw 850, vdw 855. This soft bristle brush head is 300mm wide which makes it easy to control finishing and removing excess around details and the edges of the paving. Important Note: We do not supply the 'broom handle' needed to insert on the squegee or soft bristle brush heads, as these are inexpensive and widely available locally to you in any DIY Shed, builders merchant, or hardware store.