RESIBLOCK '22' is a urethane based low viscosity prepolymer jointing sand stabiliser of exceptional effectiveness.

Its excellent penetration comes about by solvent evaporation,with polymerisation then being effected by atmospheric moisture. It incorporates a completely unique moisture curing system.

Its function is to bind the particles of sand together and to the vertical faces of the pavers.

RESIBLOCK '22' is formulated for the sealing snd stabilising of all flexibly laid block paving. This product is only for experienced and Professional Contractors use.

NCC Streetscape PU Superior 'wet-look' paving sealant is a urethane based low viscosity prepolymer in Hydrocarbon solvents.

Its function is to bond the jointing sand and seal the surface of the concrete block paving. Its penetration comes about by solvent evaporation, and polymerisation is created by the atmospheric and residual moisture effecting the cure and hardening of the material into a durable sealing coat.

The resulting effect is an in-situ bond and stabilisation of the pavement that retains its normal flexural properties.

For a less glossy 'Matt Finish' use NCC Streetscape PU Superior Matt.

NCC Streetscape PU Superior is generally reccomended for Professional Contractors application only.

Resiblock Trade is a new all purpose paving acrylic sealer to deliver either a matt or a soft sheen finish.

It is used in one coat for a matt finish or two coats for a silk semi gloss finish with no chiping, peeling or flaking.

It is suitable for concrete blocks, clay paving, flags and most natural stone pavers and products.

It is applied by brush, roller or spray at approximately 1.8 to 2.2 square metres per litre on concte paving blocks and 2.2 to 4.0 square metres per litre on flags.

Suitable for our professional contractors and competent DIY'ers.

Indian Sandstone is a beautiful hard landscaping medium suitable for paths, patios and even driveways. As with all external paving, this investment can need to be protected against staining or freeze thaw reaction for example.

NCC Streetscape Sandstone Sealer is a low viscosity prepolymer PU available as a gloss colour enhancer or matt and almost invisible seal.

Its penetrates and then polymerises. Always ensure that the stone surface is dry and clean before sealing and allow at least 4-6 hours before walking on the suface - dependent on the temperature.